←
→

Cycle 3 – Final Project

Posted: December 13, 2020 | Author: | Filed under: Uncategorized |Leave a comment »

In this iteration of the project, I completed a more robust prototype of the box, which allows a more usable interface while calling cues.

Inside of the box, where the Makey Makey is housed.
These three photos show the sides of the box, where different parts exited. Pictured is the plug-in cord for the Makey Makey, the wires that connected the numbers to the Makey Makey, and the conductive thread which was used for grounding.
The front of the box! The numbers each are labeled to show their functions, and then the rectangle at the bottom is what needs to be held in order to be able to ground the Makey Makey.
The inside of the lid, documenting the purpose and materials of the box.

The box evolved between cycle two and three, but adding all of the wires and the grounding option. In cycle two, the box mainly just had the spot outlined for the Makey Makey, and the top of the box had numbers painted on. I improved by then adding all of the wires, cutting the holes for the box, and securing everything inside the box.

The patch did not change from cycle 2.

ACCAD-Final-Project.izz_-1Download

This project could also work off of just the Izzy patch, but you would then need to memorize which letters are what number, where the box allows you to just think of the numbers.

Leave a Reply

←
→